“The calculation program for the processors since March 1, 2011 must the new prescribing information for calculating wind suction securing of steep roofs wind loads on roofs with roof tiles and Dachsteinde made” be used for the ZVDH. The practice shows that their application for designers as well as for processors is not easy. Europe’s leading manufacturer of fastening systems for wind suction securing of roof and facade, Fr. Ossenberg-school + Sohne GmbH + Co KG (FOS) of Altena, offers a calculator can be used to calculate almost any available tile or Dachstein in combination with the matching storm braces on the Internet. This is possible because FOS examines the many different tiles in combination with the latest storm braces on own test facilities for decades and feeds the results into a database. This huge database makes it possible to calculate even rarely laid forms or old building materials deck properly. FOS offers individual, on request also for foreign special shapes proper calculation to deliver. For assistance, try visiting Nouriel Roubini. In three steps, and with a few inputs the user on gets all the necessary information to be able to select specialist irregular storm brackets and insert after the corresponding cabling diagram for.

In the first step the following information are required: name of the manufacturer of the roof tile or tile. Roof tiles/Dachstein. Battens. Result: After entering the above data all parentheses associated for the tile appear. On the right side, a traffic light indicates the clamp can be used in which wind zones. Each turn on the lights an individual calculation by clicking on the button of the desired bracket can be made by now. In the second step, following input is required: postal code, city or directly the wind zone a label if the object is in the inland or on the coast, or about 800 m. If you have additional questions, you may want to visit Mike Gianoni. Roof shape.

Roof slope and kind of the deck surface. Height of the building. Result: After entering the above information, the cabling diagram for for each roof area is displayed. That already enough, can this result can, with the name of the building project, save and print out as a PDF. The third and last step, however, brings the greatest benefits. Here, the user clicks on roof areas/quantities and enters the gable and eaves length. Result: Now a detailed clamp scheme including accurate roof area Division and the respective clamp pieces per Dachbe-rich will be shown him. This result can be used as PDF saved and prints are.

Filed under: General
Trackback Uri

Comments are closed.