Parquet with an oblique edge is the cheapest. Technological process of manufacturing parquet consists of several steps: sawing logs on boards, sorting boards on the radial and tangentalnye; cross cutting boards on the ends, or segments, cut lengthwise ends of boards on the fascia (the workpiece), its sorting, drying, sorting, after drying, gouging and otortsovka; sorting, labeling and packaging. Bladed flooring is often made of friezes (blank), manufactured at the sawmill of the floorboard, as well as waste from sawmills. Panelboard parquet is produced in as a shield consisting of a base (foundation) and glued to it parketin (riveting) of thickness 12-20 mm (lining). The thickness is determined parketin wood and the appointment of the room in which fits the parquet. Shields are sizes from 500 mm x 500 mm to 1500 mm x 1500 mm.
The manufacturing process of panel parquet is to manufacture of wooden bars of the shield base, assembly and facing him. Assembling the base and a sticker is parketin high-quality adhesive. Shields are placed on a wooden crate and driven to her nails, possibly laying boards directly on the leveled and dried concrete base floor. Shields, in this case fastened to each other staples. Panelboard parquet is rich in the figure, solidity, durability, low labor input during installation. For this type of parquet flooring is an art.
Gabled parquet produced from waste products of furniture, oak barrels, In-line AP, etc., in the form of plates no larger than 500 mm x 500 mm, glued together from strips. The service life of flooring to a large extent depends on its correct operation; parquet can not be washed and left for a long time nenatertym and it should be cleaned with wet sawdust, rags and brushes, polished parquet should beeswax or whitewashed at least once a month. Under these conditions parquet almost no wear. Appearing in the Middle Ages (eg, parquet floor of oak staves – "oak brick" – in Russia with 16., Etc.), flooring achieves artistic excellence to the 18-19 centuries. in diverse countries in Europe. Development artistic form of parquet is closely connected with the general stylistic development of art. The best technical and artistic qualities possessed panelboard parquet floors, common in Russia in 18-19 centuries. For panel parquet mainly been used for over 50 different species of wood of various pattern (texture) and color. Produced separately or part of a pattern cut into the basic rocks, which served as the general background (so-called. Intarsia) or glued on a common base and drove close to each other (Marquetry). In creating the parquet was used mainly, natural wood color, but also used touch-up and podkurivanie, and in addition, unusual engraving of wood and sometimes inlaid with other materials.
Filed under: General
Trackback
Uri